Coral fleece

Coral velvet manufacturers, coral velvet manufacturing, coral velvet direct sales in the scheduled type, should pay attention to not dripping oil, tearing the edge, the length of the door should be good, the weight and the customer's requirements can not exceed ± 10g, second note Whether there are problems such as the production, grid, color, and stickyness of the wind tunnel prints, the resolution of these problems must be cautious and timely. Always pay attention to whether the equipment is in good condition, whether the tension, temperature, and speed control are appropriate. And when the wind tunnel is produced, it should be seen at a small wind level. The general wind level is about 1500 rpm, and one side should pay attention to the wind tunnel.

4 edging: The operation of the edging is similar to that of the seam head. It adopts the outer edge of the hair, and the width is about 3~5cm. The worker must strictly demand himself during the edging process. It is forbidden to increase the edging width for convenience and speed. The process is mainly for the next process to prevent curling during dyeing.

Process points and precautions

1 Generally, the low-temperature type is used for dyeing light color, the medium temperature type is used for dyeing medium color, and the high temperature type is used for dyeing dark color;

2 Different disperse dyes have different sensitivity to acid, affecting the color depth and shade, and serious color change, color flower, etc., so the PH value of the dye solution must be adjusted, the pH value is 4.5-5.5, the dye solution In the most stable state;

3PET fiber dyeing, dyeing temperature, stability control is the key, the initial temperature is controlled in light color 70 ~ 80 ° C, medium color 80 ~ 85 ° C, dark color 85 ~ 90 ° C;

4 After finishing, the temperature and rate of each process should be strictly controlled.

Washing instructions

Cold water, non-rolling bucket washing machine, please put in the laundry bag. The dark bathrobe is washed for the first time, and the light bathrobe is fine. It can be machine washed.

A, 30 degrees below the water temperature washing machine weak wash

B, neutral detergent

C, can not be bleached, not dry cleaning

Advantages and disadvantages

advantage

Coral velvet is made from imported DTY microfiber. Compared with other textiles, the advantages are particularly obvious: it is soft, delicate, lint-free and easy to dye.

Soft to the touch: The single yarn is fine and has a small flexural modulus, so the fabric has outstanding softness.

Good coverage: due to the high density between fibers and large specific surface area, the coverage is good.

Good to take: Because the fiber has a large specific surface area, it has a high wicking effect and breathability, and it is comfortable to wear and has good decontamination: because the fabric is soft and can be closely adhered to the object to be wiped, it is very good. Cleaning effect.

Optical properties: Since the specific surface area of the fiber is large, the light reflection on the surface of the fiber assembly is poor, and therefore, the fabric made of the fiber is light and soft.

Disadvantage

It is easy to start static electricity. Because of the weaving principle, there is a phenomenon of hair loss. It is recommended to wash it before washing. (Winter skin is dry, can be moisturized before wearing, or use static cleaning solution when washing), because it is necessary to drop the hair, it is recommended that people with skin allergies and asthma should avoid wearing the fabric.

Application

Coral velvet is one of the newest and best-selling fabrics in textile fabrics. It is characterized by soft touch, fine texture and environmental protection.